ASUS ROG Loki SFX-L 850W Platinum White Power Supply Unit 24-Pin ATX
Aura Sync RGB Lighting PCIe 5.0 - 90YE00N2-B0NA00
The Quietest SFX-L PSU
Taking after the ROG Thor, the ROG Loki SFX-L 850W Platinum White
Edition brandishes the same enthusiast-grade components and features,
all packed into an SFX-L form factor. Boasting quiet operation and high
performance, the Loki is primed to power your next SFF build.
CoolingROG
Heatsinks
Cool under pressure ROG
heatsinks facilitate lower temperatures, longer component lifespan, and
extended 0dB operation.
Axial-tech Fan Design
Better, faster, stronger
Axial-tech fan design features a smaller fan hub that facilitates longer
blades and a barrier ring that increases downward air pressure. For ROG
Loki PSUs, we've scaled that design to 120mm so it keeps things cool at
low RPMs while producing less noise.
Dual Ball Fan Bearings
2x longer lifespan The fan
impeller spins on a dual ball bearing setup that will last up to twice
as long as a sleeve bearing design.
0dB Technology
Quiet intelligence To
reduce noise output, the PWM-controlled fan shuts off entirely when the
PSU load is 40% or below.
Lambda A Certification
Quietly deviant On
average, ROG Loki emits less than 25 dB of noise earning a coveted
Cybenetics Lambda A certification.
Engineering80
PLUS Platinum Certified
Effortless output Low-ESR
Japanese capacitors further improve efficiency and reduce heat, readying
ROG Loki to reliably fuel your build for years to come.
ATX 3.0 Compatible
Step into the future The
latest power specification updates have landed. ATX 3.0 ushers in
tighter voltage and current regulation guidelines for next-gen hardware
- and ROG Loki steps ahead of the curve by being fully compliant. A
16-pin PCIe cable ripe for piping up to 600W of power to PCIe Gen 5.0
graphics cards is bundled with the PSU, bringing large-scale
capabilities to SFF rigs.
ExperienceARGB-illuminated
Fan & Aura Sync
Magical glow The Loki's
120 mm fan features eight addressable LEDs ready to be customized with
Aura Sync to create coordinated lighting patterns across your build. *
If the connector cable is not used, the default color effect is rainbow.
* To enjoy Aura Sync, you'll need an Aura Sync-compatible ASUS or ROG
motherboard. Similarly, the Smart Mode lighting effect, which reflects
GPU temperature, requires use of a compatible ASUS or ROG graphics card.
Note: The content above is generic for the series.
For Correct info about this particular model, please refer to
Specifications section.