A Grade. These are Open boxed / Returned units in Pristine Condition and Original packaging. They are professionally tested and restored to Factory default state. Cosmetically they would be nearly new units with none to few unnoticeable marks or scratches. In some occasions They might have non-original accessories.
The Instant AP 205 Access Point from ARUBA is a compact and cost-effective dual radio, which delivers wireless data rates of up to 867 Mb/s to 5 GHz devices with 802.11ac technology each with 2x2 MIMO streams, while simultaneously supporting 2.4 GHz 802.11n clients with data rates of up to 300 Mb/s. The multifunctional and wireless Access Point (AP) maximizes mobile device performance in medium density enterprise Wi-Fi environments. It features four integrated omni-directional, downtilt antennas.
Wi-Fi Client Optimization
It features patented ClientMatch technology, which continuously gathers session performance metrics from mobile devices. If a mobile device moves away from an AP or if RF interference impedes performance, ClientMatch automatically steers the device to a better AP.
Advanced Cellular Co-Existence (ACC)
ACC allows WLANs to perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems, and commercial small cell/femtocell equipment.
Quality of Service
The Access Point supports priority handling and policy enforcement for unified communication apps, including Microsoft Lync with encrypted video-conferencing, voice, chat, and desktop sharing.
Controller-Managed AP or Remote AP (RAP) Running ArubaOS
When managed by Aruba Mobility Controllers, the Access Point offers a centralized configuration, data encryption, policy enforcement, and network services, as well as a distributed and centralized traffic forwarding.
Instant AP running InstantOS
In instant mode, a single AP automatically distributes the network configuration to other instant APs in the WLAN. Easily power up on Instant AP to configure it over the air, and plug in the other APs.
The Access Point Specifications
2.4 GHz (300 Mb/s maximum rate) and 5 GHz (867 Mb/s maximum rate) radios, each with 2x2 MIMO and four integrated omni-directional downtilt antennas.
Capable of part-time or air-monitoring, the spectrum analyzer remotely scans the 2.4GHz and 5GHz radio bands to identify sources of RF interference.
Wireless Radio Specifications
AP Type: Indoor, dual radio, 5 GHz 802.11ac and 2.4-GHz 802.11n 2x2:2
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
2x2 MIMO with two spatial streams and up to 867 Mb/s wireless data rate
2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
-5.725 to 5.850 GHz
Dependent on configured regulatory domain
Dynamic Frequency Selection (DFS) optimizes the use of available RF spectrum
Supported Radio Technologies
802.11b: Direct-Sequence Spread-Spectrum (DSSS)
802.11a/g/n/ac: Orthogonal frequency-division multi-plexing (OFDM)
Supported Modulation Types
802.11b: BPSK, QPSK, CCK
802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power: Configurable in increments of 0.5 dBm
Transmit Power (maximum):2.4-GHz Band: +21 dBm (18 dBm per chain)
5 GHz Band: +21 dBm (18 dBm per chain)
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Short guard interval for 20 MHz, 40 MHz and 80 MHz channels
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beamforming (TxBF) for increased reliability in signal delivery
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2)
802.11n High-Throughput (HT) Support: HT 20/40
802.11ac Very High Throughput (VHT) Support: VHT 20/40/80
802.11n/ac Packet Aggregation: A-MPDU, A-MSDU
Aruba Instant AP
Mobility controller-managed AP
Remote AP (RAP) for branch deployments
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer, dedicated or hybrid
Secure enterprise mesh
Four integrated downtilt omni-directional antennas for 2x2 MIMO with maximum antenna gain of 4.0 dBi in 2.4 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is approximately 30 degrees.
Temperature: 32 to 104°F (0 to 40°C)
Humidity: 5 to 95% non-condensing
Storage and Transportation
Temperature: -40 to 158°F(-40 to 70°C)
10/100/1000BASE-T Ethernet network interface (RJ-45) Auto-sensing link speed and MDI/MDX
802.3az Energy Efficient Ethernet (EEE)
PoE-PD: 48 VDC (nominal) 802.3af PoE
DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 0.3" (9.5 mm) length
Visual Indicators (LEDs):
Ethernet link status (ENET)
Radio status (Two: RAD0, RAD1)
Reset Button: Factory reset
Serial console interface (RJ-45)
Kensington security slot
Maximum Power Consumption (Worst-Case): 12.5 W (PoE) or 11.7 W (DC)
Maximum Power Consumption (Worst-Case): In Idle Mode: 8.4 W (PoE) or 7.7 W (DC)
Direct DC source: 12 VDC nominal, ±5%
Power over Ethernet (PoE): 48 VDC (nominal) 802.3af-compliant source
Power sources sold separately
When both power sources are available, DC power takes priority
FCC/Industry of Canada
R&TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC
EN 300 328
EN 301 489
EN 301 893
EN 60601-1-1 and EN 60601-1-2
MTBF: 711,187 hours at 77°F (25°C) operating temperature
CB Scheme safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
Dimensions (W x H x D)
5.9 x 1.6 x 5.9" (150.0 x 41.5 x 150.0 mm)
13.40 oz (380.00 g)
SKU AP-205-AG Weight (g) 0.0000
To cater the needs of all customers, we offer two delivery options at checkout so you can choose one which best suits your requirements.
Free UK Mainland Delivery
In this option we will deliver your product free of cost but it will take 2 to 4 working days for the product to be delivered.
Next Working Day Delivery
If you want your desired product to be delivered next working day you will have to place your order before 3pm. The delivery charge is £7.99 at the time of placing order. This option does not include delivery on Saturday or Sunday.