A Grade. These are Open boxed / Returned units in Pristine Condition and Original packaging. They are professionally tested and restored to Factory default state. Cosmetically they would be nearly new units with none to few unnoticeable marks or scratches. In some occasions They might have non-original accessories.
The HPE 5500 HI Switch Series delivers outstanding resiliency, security, and multiservice support at the edge layer of large campus and branch networks. The 5500 HI has a robust feature set supporting 1440 W PoE+, fixed and modular 10GbE, 9 chassis IRF stacking, Static & RIP Routing, OSPF, MPLS, ACLs, IPv6, and Energy Efficient Ethernet.
The HPE 5500 HI Switch Series offers advanced technologies including OAM, CFD, Multilevel Quality of Service (QoS), MPLS, and VPLS and can be managed with the HPE Intelligent Management Center (IMC) for a single view of your entire network.
Highly Resilient, More Secure and Scalability
The HPE 5500 HI Switch Series delivers outstanding resiliency, security, and multiservice support capabilities at the edge layer of data center and large campus networks. Advanced technologies include OAM, CFD, RRPP, BFD, Multi-level QoS, MPLS, and VPLS.
Offers scalable stacking with fixed or modular 10GbE uplinks (SFP+ and 10GBASE-T) and up to 1440 W of PoE+ power with dual redundant hot-swappable power supplies for growth and reliability.
Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks. The 5500 HI has IPv6 support and fully featured L3 functionality, including RIP, OSPF, ISIS, BGP, and PIM.
Includes software-defined network (SDN) capabilities with OpenFlow 1.3 support for future proofing your network.
Limited Lifetime Warranty and no software licensing required.
Powerful Performance with Higher Levels of Security
The HPE 5500 HI Switch Series provides higher levels of security with hardware-based, wire-speed access control lists (ACLs).
Provides simple administration without impacting network performance offering feature-rich TCAM-based ACL implementation.
Non-blocking architecture delivers up to 224 Gbps of wire-speed switching with a non-blocking switching fabric and up to 167 Mpps throughput.
Robust Quality of Service (QoS)
The HPE 5500 HI Switch Series supports advanced classifier-based QoS which directs traffic using multiple match criteria based on Layer 2, 3, and 4 information. It applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch.
Creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence. Supports filter, redirect, mirror, or remark tasks.
Get extensive traffic prioritization with congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), SP+WDRR, and SP+WFQ.
Comprehensive Security Control and a Single View of the Network
The HPE 5500 HI Switch Series supports flexible authentication methods including 802.1X, and MAC and Web for greater policy-driven application security.
This Series offers identity-driven security and access control with automatic VLAN assignment. Per-user ACLs allow access to specific network services without risking network security. Security features include: IP source guard, DHCPv6 snooping, STP BPDU port protection, RADIUS/HWTACACS, and SSL.
Can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events.
- Layer 3 switch with 24 10/100/1000 ports
- 4 GbE SFP and 2 10GbE SFP+ slots
- 2 expansion module slots
- supports Intelligent Resilient Framework (IRF) virtual fabric and dual power supplies
- (24) RJ-45 autosensing 10/100/1000 ports
- (4) fixed Gigabit Ethernet SFP ports
- (2) SFP+ 10GbE ports
- (2) port expansion module slots
- Supports a maximum of 38 autosensing 100/1000 ports, with optional module
Memory and processor
- 1 GB SDRAM
- Packet buffer size: 3 MB
- 512 MB flash
- 1000 Mb Latency: < 5 µs
- 10 Gbps Latency: < 3 µs
- up to 130.9 Mpps
- 176 Gbps
- 9 switches
Dimensions and Weight
Minimum dimensions (W x D x H)
44 x 36 x 4.37 cm
SKU JG311A-AG Weight (g) 100.0000
To cater the needs of all customers, we offer two delivery options at checkout so you can choose one which best suits your requirements.
Free UK Mainland Delivery
In this option we will deliver your product free of cost but it will take 2 to 4 working days for the product to be delivered.
Next Working Day Delivery
If you want your desired product to be delivered next working day you will have to place your order before 3pm. The delivery charge is £7.99 at the time of placing order. This option does not include delivery on Saturday or Sunday.