APC Switched Rack 2G Power Distribution Unit 16A, Input 400V/Output 230V, AP8981
- Condition: N/A
Customers Also Viewed
These are Open boxed / Returned units that are professionally refurbished. Cosmetically they may bear marks / scratches / small dents, that would not hinder functionality. They may be in replacement packaging might have non-original accessories. Non-essential accessories (Manuals / etc) may be missing.
1. User Interface display for local access
2. Environmental monitoring port for external temperature/humidity probe
3. Local USB port for flash firmware updates and downloading data/event logs (not to be used as serial port)
4. CAN In/Out ports for network port sharing
5. 21 x IEC320 C13 & 3 x IEC320 C19 Outlets
6. 1.8 metre power cord terminates with an IEC309 16A 5 pin input connector.
PC Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
The AP8981 Rack PDU platform will help IT and facilities managers more effectively manage power capacity and functionality for critical network, server, and data centre equipment. The Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing and outlet use management and solve rack-level power needs while incorporating intelligent features such as real power measurement and environmental monitoring, all in a space efficient, zero-U form factor. AP8000 Series Rack PDUs include active power metering and remote alarming with volts, amps, real power (kW), and energy (kWh) measurements.
The AP8981 3 Phase PDU has twenty one (21) IEC-C13, three (3) C19 outlets and one (1) IEC-309 16A input
Ultra-low-profile, space-saving design
Locking IEC receptacles and locking power cord compatible
Environmental monitoring port for external temperature/humidity monitoring
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Network Port Sharing (Up to four rack PDUs share one IP address in one enclosure)
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
Active current measurements (amps)
Active power measurements (Including volts, amps, real power (kW), and energy (kWh)
User customizable alarms and warnings
Embedded log memory to record/review/report historic metered data
Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)
StruxureWare Data Center Expert:
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network